Promotion Alert! – Ilana Danzig
We are super proud to announce that Ilana Danzig (P.Eng., Struct.Eng., PE, SE, M.Eng.) has recently been promoted to Associate Principal in our Vancouver office!
Since joining Aspect in 2019, Ilana has had a tremendous impact on both the work of the firm as well as professional growth of our team. She is extremely well respected as an engineer and mentor, both within our team and also within the industry – and has been a role model for many along the way. She brings the whole package to the table: top shelf technical excellence, a passion for teamwork and collaboration, and, importantly, a diplomacy and sense of humanity and compassion that she applies to all of her interactions.
As an Engineer, Ilana is especially passionate about structural mass timber design and seismic engineering. In her new position at ASPECT, she will play a key leadership role in the development of the Vancouver office, with focus on acquisition and delivery of projects in the US.
RECENT PROJECTS
Terminus Office Building
Langford, BC
A 5-storey mass timber post-and-beam building that contains the first ever steel Buckling Restrained Braces housed within a timber frame. Located in a high seismic region in Langford, BC, the lateral system needed to be highly ductile while allowing the wood to be exposed. The team therefore developed a glulam frame that provided the over strength and drift compatibility needed for a BRB system.
Architect: Jack James Architect
Tallwood 1
Langford, BC
A 12-storey encapsulated mass timber building consisting of ground-level commercial space and 11 storeys of residential units, with 1 storey concrete podium and 2 levels of underground concrete parkade. The structure is a streamlined and efficient point-supported CLT on glulam post floor plate, with highly ductile eccentrically braced steel frames. Tallwood 1 is celebrated as the first mass timber tall building on Vancouver Island, and one of the first built in Canada.
Architect: Jack James Architect
Wadajir Market & Residences (Modular Building)
Tukwila, WA
A modular mass timber, multi-storey project consisting of 96 units of family housing and a community marketplace. The CLT volumetric modules will be situated atop a one level mass timber podium structure with commercial and mixed occupancies below.
Architect: Mithun
Darrington Wood Innovation Center
Darrington, WA
An industrial facility that will include a CLT & Glulam Factory, a 3D Modular Factory, a Sawmill, as well as smaller pre-fabricated boiler and kiln buildings, at 245,000 sq.ft. total. True to the project’s name, the buildings are intended to be innovative and modern structures and will be built from high-performing Mass Timber materials and systems chosen for their cost, ease of fabrication, strength, and performance.
Architect: Mithun
Modular CLT Townhomes
Seattle, WA
An exciting, first of it’s kind, volumetric modular townhome project in Seattle. The project will be comprised of 7 units at 1,100 sq.ft. each, incorporating offsite prefabricated CLT modules on a concrete foundation. CLT shear walls are used as the Seismic Load Resisting System.
Architect: Mahlum
Rockford Place
Langford, BC
Two 6-storey mixed-use residential buildings totalling 165,000 sq.ft. with 2 levels of underground parkade each. The structures are concrete to the main floor, and from level 2 up are comprised of CLT floors on light wood frame walls, with additional lofts on the 6th floor.
Architect: Jack James Architect
Capilano University Student Residence
North Vancouver, BC
This new Student Housing Facility will provide 362 beds of student accommodation and related facilities. The project is comprised of a 6-storey student residence of 87,000 sq.ft. (light wood frame on concrete transfer slab), and a 1-storey dining hall of 7,000 sq.ft. (mass timber on shallow concrete foundation). Learn more…
Architect: IBI Group/HDR
PUBLICATIONS / PRESENTATIONS
Ilana has not only engineered many state of the art buildings, but she also gives back to the engineering community through her publications and talks, such as:
| Tallwood Cost Comparison Study | Canadian Wood Council | Not Yet Published |
| Technical Guide for the Design and Construction of Tall Wood Buildings in Canada. Contributor and Peer Reviewer | Published by FPInnovations | 2013 and second edition in 2022 |
| Terminus, Vancouver Island: Solving a Mass Timber Challenge in a Seismic Region | The Structural Engineer (IStructE publication) | April 2022 |
| Terminus: Innovative Seismic Design For Mass Timber | Published in New Zealand Timber Design Journal, Volume 29, Issue 4 | November 2021 |
| Speaker | Future of Prefabrication Symposium, UBC | March 2022 |
| Mass Timber in High Seismic | Structural Engineering Podcast, Episode 59 | May 2021 |
| Terminus: Innovative Seismic Design | Published in Construction Business | April/May 2021 |
| Speaker | Future of Prefabrication Symposium, UBC | March 2021 |
| Demystifying Tall Wood Buildings | Published in Construction Business | September/October 2020 |
| Tall Wood Buildings | Conferences in Victoria, Vancouver, Kelowna, and Edmonton with WoodWORKS! BC | 2019 |
| Mass Timber + Prefab Housing | Mass Timber Meetup | September 2021 |
Please join us in congratulating Ilana on this much-deserved promotion!
Learn more about our stellar team here.
more news
Meet the Associates – Paul Paquet
We are proud to announce that Paul Paquet (P.Eng., M.A.Sc.) has joined the ASPECT team as an associate in our Toronto office...
Malahat Skywalk Wins in the 2021-22 Wood Design & Building Awards
We are extremely proud to announce that the Malahat Skywalk has won the Canadian Wood Council Structural Innovation Award in the 2021-22 Wood Design Awards!
Meet the Associates – Thomas Brotschi
We are thrilled to announce that Thomas Brotschi (B.Sc.BFH) has been promoted to Associate in our Bern office!